We are happy to announce Adam Baxter will join Metway as Wiring Systems Business Development Manager.
We are pleased to be joined by Kevin Saunders as Southern connect Business Development Manager.
Metway are happy to announce the recruitment of Paul Davies to the Business Development Team.
Introducing Metway’s innovative Connection Centre lighting control modules.
Metway are pleased to congratulate Kevin Stokes – Deputy Warehouse Supervisor for 40 years loyal service.
John joins Metway as Product and Technical Dept Manager and brings with him a wealth of knowledge from over 35 years...
Metway are pleased to congratulate Chris Brown – Internal Business Development Manager and Michael Pumfrey –...
This Saturday night, the Vertu Motors Arena in Newcastle will witness the return of Dublin boxer Jay Byrne as he...
This addition complements our existing range of White and Red sockets and plugs, all featuring the industry-standard...
This project was designed in conjunction with the contractor, Eco-1 of Walsall.
There are 250 products.
Also available in a raised profile
The Metway 6 pole Besa socket outlet is designed to fit standard 'G' type industry preferred connectors.
This fits straight onto standard round U.K plastic or metal besa/conduit boxes.
Typical applications for this type of connector would be, any installation that has fire regulations insisting on mechanical containment of cabling with the building fabric (e.g where the use of conduit and conduit boxes is required).
The easy fit and connect Besa box is supplied with fixing screw. It offers an easy loop in and out facilitated by double stacked terminal design on mounting plate connectors.
Moulded in V0 grade plastic and rated at 16A, 230V AC +/- 10%, 50Hz with a terminal capacity of 2.5mm², this product is compliant with BS 733:2010+A1:2014 and the connectors to BS61535.
Our 6 pole Besa latching leads, are the mating part to our 6 pole Besa socket outlet. They are supplied with a 6-pole centre latching plug, to a free end using 1.00mm² LS0H cable. This can be supplied in lengths as per your requirements.
These are supplied with a black/blue industry standard, connector coding. There is an option for white or red covers.
The Metway MA-CANPIR passive infra red detector is an addressable sensor for use with the MA addressable range of LCM's and gateways. It detects movement using a PIR sensor, which updates the light controller using a CAN bus interface.
Daylight linking can be configured either to keep lights off when there is sufficient ambient light, or used as part of a closed loop to maintain a pre-set luminance level in a dimmable system.
Connection is made by RJ12 connectors on the back of the unit, there are two of these to allow easy onward connection.
The Metway MA-DALIPIR passive infra red detector is an addressable sensor for use with the MA addressable range of LCM's and gateways. It detects movement using a PIR sensor, which updates the light controller using a DALI interface.
Daylight linking can be configured either to keep lights off when there is sufficient ambient light, or used as part of a closed loop to maintain a pre-set luminance level in a dimmable system.
The walk-test mode, indicated by a built-in LED, helps when configuring the detector. The MA-DALIPIR is connected via a screw terminal on the rear in a standard DALI two wire configuration, powered from the data line.
Our Metway fully addressable leads are supplied with a 6-pole side latching plug, to a free end using 1.00mm² LS0H cable. This can be supplied in a variety of cores, and lengths as per your requirements.
These are supplied with a black/blue industry standard, connector coding. These leads will connect to the two fully addressable lcm's MA-DD1LCM10/M and also MA-DS10LCM10-S5.
