MCC10S has 10 x 4-pole luminaire outputs. 2 x 6-pole presence and absence connection.

Metway can provide leads for other manufacturers lcms, such as Ex-Or.

The LCM lead is supplied with a 6-pole latching plug, to a free end on 1.00mm² LS0H cable.

This can be supplied in a variety of cores, and length as per your requirements.

These are provided with a black/grey industry standard connector coding.

MDCC12B 12 x 6-pole Dali luminaire outputs. 2 x 3-pole Dali sensor connection. 125mA Dali power supply. Option for Bluetooth Dali module installation.

Metway can provide leads for other manufacturers lcms, such as CP Electronics.

The LCM lead is supplied with a 6-pole latching plug, to a free end on 1.00mm² LS0H cable.

This can be supplied in a variety of cores, and length as per your requirements.

These are provided with a black/blue industry standard connector coding.

Metway can provide leads for other manufacturers lcms, such as Hager Klik.

The LCM lead is supplied with a 6-pole latching plug, to a free end on 1.00mm² LS0H cable.

This can be supplied in a variety of cores, and length as per your requirements.

The PIRSW is a 360° switching PIR sensor. Designed with a low profile for aesthetically demanding architectural projects providing a high quality sensor for simple on / off occupancy control or providing semi-automatic (absence detection) control.

An intelligent photocell is also included to prevent switching of the lights when natural daylight is available Set-up of the sensor is carried out using a remote control handset with program memory allowing one-key commissioning where common settings are used for multiple devices.

The MMSW is a 360° switching microwave sensor. Designed with a low profile for aesthetically demanding architectural projects providing a high quality sensor for simple on / off occupancy control or providing semi-automatic (absence detection) control.

An intelligent photocell is also included to prevent switching of the lights when natural daylight is available. Set-up of the sensor is carried out using a remote control handset with program memory allowing one-key commissioning where common settings are used for multiple devices.

Our MCC5S and MCC10S Connection Centre LCM'S, use a 4 pole lead to connect to luminaires. They are supplied with a 4-pole side latching plug, to a free end using 1.00mm² LS0H cable.

This can be supplied in a variety of cores, and lengths as per your requirements.

These are supplied with a black industry standard, connector coding.

Our MCC to 4 pole flat extender leads, can be latched to our 4 pole lcm and then connected to our 4 pole tee piece and other 4 pole flat leads if you need the option to daisy-chain.

They are supplied with a 4-pole side latching plug, to a free end using 1.5mm² LS0H cable.

This can be supplied in a variety of lengths as per your requirements.

These are supplied with a black industry standard, connector coding.

Our MCC to 6 pole flat extender leads, can be latched to our 6 pole lcm and then connected to our 6 pole tee piece and other 6 pole flat leads if you need the option to daisy-chain.

They are supplied with a 6-pole side latching plug, to a female 6 pole socket using 1.5mm² LS0H cable.

This can be supplied in a variety of lengths as per your requirements.

These are supplied with a black/blue industry standard, connector coding.