Metway can provide leads for other manufacturers lcms, such as Ensto.

The LCM lead is supplied with a 6-pole latching plug, to a free end on 1.00mm² LS0H cable.

This can be supplied in a variety of cores, and length as per your requirements.

These are provided with a blue/white industry standard connector coding.

Metway can provide leads for other manufacturers lcms, such as Ex-Or.

The LCM lead is supplied with a 6-pole latching plug, to a free end on 1.00mm² LS0H cable.

This can be supplied in a variety of cores, and length as per your requirements.

These are provided with a black/grey industry standard connector coding.

Metway can provide leads for other manufacturers lcms, such as CP Electronics.

The LCM lead is supplied with a 6-pole latching plug, to a free end on 1.00mm² LS0H cable.

This can be supplied in a variety of cores, and length as per your requirements.

These are provided with a black/blue industry standard connector coding.

Metway can provide leads for other manufacturers lcms, such as Hager Klik.

The LCM lead is supplied with a 6-pole latching plug, to a free end on 1.00mm² LS0H cable.

This can be supplied in a variety of cores, and length as per your requirements.

The PIRSW is a 360° switching PIR sensor. Designed with a low profile for aesthetically demanding architectural projects providing a high quality sensor for simple on / off occupancy control or providing semi-automatic (absence detection) control.

An intelligent photocell is also included to prevent switching of the lights when natural daylight is available Set-up of the sensor is carried out using a remote control handset with program memory allowing one-key commissioning where common settings are used for multiple devices.

The MMSW is a 360° switching microwave sensor. Designed with a low profile for aesthetically demanding architectural projects providing a high quality sensor for simple on / off occupancy control or providing semi-automatic (absence detection) control.

An intelligent photocell is also included to prevent switching of the lights when natural daylight is available. Set-up of the sensor is carried out using a remote control handset with program memory allowing one-key commissioning where common settings are used for multiple devices.

Our MCC5S and MCC10S Connection Centre LCM'S, use a 4 pole lead to connect to luminaires. They are supplied with a 4-pole side latching plug, to a free end using 1.00mm² LS0H cable.

This can be supplied in a variety of cores, and lengths as per your requirements.

These are supplied with a black industry standard, connector coding.

Our MCC to 4 pole flat extender leads, can be latched to our 4 pole lcm and then connected to our 4 pole tee piece and other 4 pole flat leads if you need the option to daisy-chain.

They are supplied with a 4-pole side latching plug, to a free end using 1.5mm² LS0H cable.

This can be supplied in a variety of lengths as per your requirements.

These are supplied with a black industry standard, connector coding.

Our MCC to 6 pole flat extender leads, can be latched to our 6 pole lcm and then connected to our 6 pole tee piece and other 6 pole flat leads if you need the option to daisy-chain.

They are supplied with a 6-pole side latching plug, to a female 6 pole socket using 1.5mm² LS0H cable.

This can be supplied in a variety of lengths as per your requirements.

These are supplied with a black/blue industry standard, connector coding.