The 6 pole 'G' type range (comprising of 1x3 pole black and 1x3 pole blue connector) is the widely recognised, and Metway's standard, connector for dimming protocols and is compatible with the range of various dimming modules.

Combining the Metway tee modules with the following lead assemblies for any dimming operating can quickly and easily be achieved.

The 'G' type range of connectors are designed for mains connection according to EN 61 984 (connecting and disconnecting under load) and used in installation systems when using the latching covers or locking slides (VDE 0628)

Moulding are halogen free, self-extinguishing and low fuming.

Our MCC Connection Centre and MDCC standalone addressable LCM, can be connected using the same leads. They are supplied with a 6-pole side latching plug, to a free end using 1.00mm² LS0H cable.

This can be supplied in a variety of cores, and lengths as per your requirements.

These are supplied with a black/blue industry standard, connector coding.

Alternatively there is an option for black/grey connectors.

Our Metway fully addressable leads are supplied with a 6-pole side latching plug, to a free end using 1.00mm² LS0H cable. This can be supplied in a variety of cores, and lengths as per your requirements.

These are supplied with a black/blue industry standard, connector coding. These leads will connect to the two fully addressable lcm's MA-DD1LCM10/M and also MA-DS10LCM10-S5.

- 1 input / 2 outputs

- T shaped

- 4 pole

Coding:

- 1 (mains)

Voltage rating:

- 250 V

Current rating:

- 20 A

- 1 input / 2 outputs.

- T shaped.

5 pole coding:

- 1 (mains).

Voltage rating:

- 250 V.

Current rating:

- 20 A.

The moulded tee distribution unit provides a means of branching off the 6-pole 166G (F) system.

- 1x Input terminal (plug).

- 2 x Output terminal (socket).

The moulded tee comes complete with interlocking latching to lock 1x input & 1x output terminal.

Latching of the second output (luminaire connection) is made during installation either by plug or panel mount connector with a locking slide.

When making installations to VDE 0628, connecting elements have to be interlocked.

We can provide Ensto 6 pole D2 tee pieces, for connection with the Ensto 6 pole D2 plug and socket.

These are supplied with a white/blue connector coding.

Our MCC6PB plug can be connected to either our MCC Connection Centre and MDCC Standalone DALI LCM.

These are supplied with a black/blue industry standard, connector coding.

Alternatively there is an option for black/grey connectors, and red covers.

Series 166GST/GBU 6 pole plug and socket connectors comply with EN 60 320 and are primarily intended for use with lighting controllers.

Our MA plugs can be connected to either of our addressable LCM's.

These are supplied with a black/blue industry standard, connector coding.

These can be supplied with either black or red covers.

Our Besa plugs are the mating part to our Besa socket outlets.

These are supplied with a black or white industry standard connector coding on 3 or 4 poles, and black/blue on the 6 pole (there is an option for black grey connectors also).

There are alternative black and red (4 and 6 pole only) covers available.

We can provide Ensto 6 pole D2 plugs, which will natively latch with the Simmtronic LCM.

These are supplied with a white/blue connector coding.