Series 980 1/4" Pitch Side and Top Entry Barrier Connector
Warning: count(): Parameter must be an array or an object that implements Countable in /home/hamdirective/public_html/metway.co.uk/wp-content/themes/metway/single-product-template.php on line 46
Series 980 barrier connectors are 1/4″ pitch and have combined screw and washer assemblies to provide very secure clamping of the conductors.
They are available in single pin side entry (typeS), double pin side entry (type D) and single pin top entry (type W) in lengths from 2 to 32 poles.
This range is not suitable for end stacking.
|Mouldings:||nylon 6.6, grey, UL94 V2|
|Screws:||M3, steel, zinc plated, blue passivated|
|Pressure plates:||steel, zinc plated, blue passivated|
|Voltage rating:||400v ~ to VDE 0110, pollution degree 3.
Creepage distance 5mm, clearance
3.5mm. Breakdown voltage 4000v ~
|Tracking distance:||CTI > 600|
|Conductor size:||2 x 0.75mm2|
|Temp limits:||max short term: 140º C
continuous: RTI 105º C
|Pin spacing:||1/4” (6.35mm)|
|Screw tightening torque:||0.51 Nm|
|Wire stripping length:||6mm|
|Recommended hole dia.
in p.c. board:
Marking: consecutive numbering, lettering or special printing available. Please provide sketch.
Insulating covers: enquire for details.