Series 930FL 3.5mm Side Entry Socket Connector
Series 930FL socket connectors are 3.5mm pitch and are suitable for use with pin strips type 931SLS & 931FST.
The pin strips can be inserted from above or below the socket connector.
By using longer pins board to board connection is also possible (details upon request).
They are available in 2 to 24 pole lengths.
Both versions can be supplied with or without wire protectors.
|Mouldings:||nylon 6.6, grey, UL94 V0|
|Screws:||M2, steel, zinc plated, blue passivated|
|Wire protectors:||stainless steel|
|Current rating:||see approvals|
|Voltage rating:||600v ~ to VDE 0110, pollution degree 1|
|Tracking distance:||sockets – CTI > 600|
|Temp limits:||max short term: 140º C
continuous: RTI 105º C
|Screw tightening torque:||0.2 Nm|
|Wire stripping length:||6mm – 6.5mm|
|Recommended hole dia.
in p.c. board:
Marking: consecutive numbering, lettering or special printing available. Please provide sketch.