Series 120D 5mm Left and Right Hand Entry Pluggable Socket Connector
Warning: count(): Parameter must be an array or an object that implements Countable in /home/hamdirective/public_html/metway.co.uk/wp-content/themes/metway/single-product-template.php on line 46
Series 120D socket connectors have a pin spacing of 5mm and are designed with either a left hand cable entry (type 120D111) or a right hand cable entry (type 120D121) which prevents incorrect insertion of the socket into the header.
They are suitable for use with all 120 series headers.
They are fitted with rising clamp terminals which can be re-used without damage to the conductors or clamping mechanism and are available in 2 pole to 24 pole lengths.
These connectors are industry standard and will interchange with most other manufacturers equivalent products.
|Mouldings:||nylon 6.6, grey, UL94 V0|
|Screws:||M3, steel, zinc plated, blue passivated|
|Contact springs & pressure plates:||bronze, tinned|
|Current rating:||see approvals|
|Voltage rating:||600v ~ to VDE 0110, pollution degree 2.
Creepage and clearance distance > 3.2mm.
Breakdown voltage 2500v ~
|Tracking distance:||CTI > 600|
|Temp limits:||max short term: 140º C
continuous: RTI 105º C
|Screw tightening torque:||0.51 Nm|
|Wire stripping length:||7mm|
|Recommended hole dia. in p.c. board:||n/a|
For part numbers please refer to datasheet
Marking: consecutive numbering, lettering or special printing available. Please provide sketch.
Pitch: also available in 10mm pitch, details upon request.