Series 210 / 126 SMD 3.5mm Pitch SMD Side Entry Rising Clamp with Solder Achors
Features
Series 210 A 126 SMD terminals have a 3.5mm spacing and are designed with screw connections including a rising clamp.
The distinguishing characteristic of this range is the greatly increased adhesion forces on the PC board.
Floating solder anchors ensure full coplanarity with the board surface and also act as the main means of adhesion to the board, removing the strain on the solder pins.
As with all SMD products, the 210 series is made from a heat resistant thermoplastic material and comes packed in either magazines or equipped with pick discs in tape and reel, making this genuine SMD terminal suitable for automatic assembly lines.
Technical Details
| Mouldings: | PA HT, black, V0 |
| Current rating: | 13.5A |
| Overvoltage category: | III III II |
| Pollution level: | 3 2 2 |
| Rated impulse voltage: | 2.5kV 2.5kV 2.5kV |
| Tracking distance: | CTI ≥ 600 |
| Temp limits: | -40º C up to 150º C; reflow solder temperature (peak) max. 260º C (15-30s) |
| Pin spacing: | 3.5mm |
| Screw: | M2, copper alloy, tinned |
| Terminal body: | brass, nickel plated |
| Solder pin: | copper alloy, tinned |
| Rated cross section: | 1mm2 |
| Conductor size: | 0.14mm2 – 1.5mm2 |
| Wire stripping length: | 5.5mm |
| Solder paste thickness: | 0.15mm – 0.2mm |
| Number of poles: | 2 – 12 |
Options
Consecutive numbering.
Special marking to drawing.
Longer pole lengths on request.
