Series 930D SMD 3.5mm Pitch SMD and THR Side Entry Connector
The 930D SMD series terminal is designed for use in an automated assemby line and is supplied with a removable pick disc although they can also be supplied loose packed in boxes.
The terminal housing incorporates a floating terminal body to compensate for irregularities in the surface of the PC board and this same feature eliminates CTE (coefficient of thermal expansion) mismatch with the PCB and thus promotes excellent in field reliability and the successful passing of thermal cycle testing.
|Mouldings:||PA HT, black, V0|
|Overvoltage category:||III III II|
|Pollution level:||3 2 2|
|Rated voltage:||125v 160v 320v|
|Rated impulse voltage:||2.5kV 2.5kV 2.5kV|
|Tracking distance:||CTI ≥ 600|
|Temp limits:||-40º C up to 150º C; reflow solder
temperature (peak) max. 260º C (15-30s)
|Screw:||M2, brass, tinned|
|Screw tightening torque:||0.2 Nm|
|Terminal body:||brass, tinned|
|Rated cross section:||1mm2|
|Conductor size:||without wire protectors: 0.75mm2 – 1.5mm2
with wire protectors: 0.25mm2 – 1mm2
|Wire stripping length:||5mm|
|Solder paste thickness:||0.15mm – 0.2mm|
|Number of poles:||2 – 12|
Also available in white
Special marking to drawing.
Self adhesive marking strip.
Longer pole lengths on request.
Also available for through hole processes. Contact the Metway sales
office for further details.