Series 140SMD 5mm Pitch SMD Side Entry Rising Clamp with Solder Anchor
Series 140SMD series have a 5mm spacing and are designed with screw connections including a rising clamp.
The wire clamp and soldering tag are manufactured as a single unit and are permanently engaged in the housing.
The solder pins are aligned parallel to the PC board with floating solder anchors on either side of the housing, ensuring 100% coplanarity with the board following the reflow solder process.
These anchors also act as the main means of adhesion to the board, removing the strain on the solder pins.
The base of the housing is equipped with stand offs which ensure a better air circulation during the solder process and thus an optimal solder result.
As with all SMD products, the 140 series is made from a heat resistant thermoplastic material and comes packed in either magazines or equipped with pick discs in tape on reel making this genuine SMD terminal suitable for automatic assembly lines.
|Mouldings:||PA HT, black, V0|
|Overvoltage category:||III III II|
|Pollution level:||3 2 2|
|Rated voltage:||200v 200v 200v|
|Rated impulse voltage:||4kV 4kV 4kV|
|Tracking distance:||CTI ≥ 600|
|Temp limits:||-40º C up to 150º C; reflow solder
temperature (peak) max. 260º C (15-30s)
|Screw:||M3, steel, zinc plated, blue passivated|
|Screw tightening torque:||0.5 Nm|
|Terminal body:||brass, nickel plated|
|Solder pin:||copper alloy, tinned|
|Solder anchor:||brass, tinned|
|Rated cross section:||1.5mm2|
|Conductor size:||0.14mm2 – 2.5mm2 (solid)|
|0.14mm2 – 1.5mm2 (flexible)|
|Wire stripping length:||6mm|
|Solder paste thickness:||0.15mm – 0.2mm|
|Number of poles:||2 – 12|
Special marking to drawing.
Longer pole lengths on request.
Self adhesive marking strip