Series 950 / 951LH 5mm pitch - low profile - for encapsulation
Warning: count(): Parameter must be an array or an object that implements Countable in /home/hamdirective/public_html/metway.co.uk/wp-content/themes/metway/single-product-template.php on line 46
Series 950 / 951LH connectors are 5mm pitch, in a low profile housing.
They have fully sealed solder pins for applications where encapsulation is required.
They are available in side entry format (series 950) or top entry format (series 951).
They are supplied in 2 to 12 pole lengths and are available with or without wire protectors.
|Mouldings:||nylon 6.6, grey, UL94 V0|
|Screws:||M2.6, steel, zinc plated, blue passivated|
|Wire protectors:||stainless steel|
|Voltage rating:||600v ~ to VDE 0110, pollution degree 1.
Creepage & clearance distance 1.8mm.
Breakdown voltage 2500v ~
|Tracking distance:||2 to 8 pole lengths: CTI > 600
9 to 12 pole lengths: CTI > 175
|Temp. limits:||max short term: 140º C
continuous: RTI 105º C
|Screw tightening torque:||0.4 Nm|
|Wire stripping length:||5mm|
|Recommended hole dia.
in p.c. board:
Marking: consecutive numbering, lettering or special printing available. Upon request
Pin spacing: available in 10mm pitch upon request.