- New
DALI 64 Gateway
The Metway DALI gateway provides an interface between DALI lighting products and our addressable control system. The module acts as a fully functional DALI addressable product with 64 individually programmable addresses. Each address can be a DALI luminaire, emergency inverter, PIR sensor, controlled relay or scene set plate.
The DALI64 is DIN rail mounted and enclosed in a steel powder coated enclosure wired to industry standard terminals.
Twin DALI64 units (i.e with 128 addresses) is also available.
A removeable memory module facilitates fast configuration of a replacement gateway should that be needed. In other words, should an gateway need to be replaced for any reason, no reprogramming is necessary, simply remove the memory module and reinsert it into the new controller.
Approvals
Request STP/BIM File
- Max 64 individually addressable outputs.
- Supports luminaires with multiple ballasts.
- Control and fault feedback indication per luminaire.
- Allows ballasts to grouped for faster control.
- Removeable plug-in memory card.
- DALI Invertor compatible.
- All DALI devices require one address except PIRs in light detection mode which require two.
Data sheet
- Voltage
- 90-220V AC, 50Hz
- Case Material
- Powder coated steel
- Product Consumption
- 1.2 watts
- Internal Fuse
- 1AT IP20
- Operating Temperature
- -10 to +50°C
- Max Humidity
- 90% RH non-condensing
- Max No Of Scene Plates/PIRs
- 15 on 4 wire DALI 10 on 2 wire DALI
- Field Comms
- CAN BUS internal screw terminals
- Local Comms
- DALI Bus screw terminals
- Configuration Memory
- 256K (non-volatile)
Specific References
Array
The Metway DALI gateway provides an interface between DALI lighting products and our addressable control system. The module acts as a fully functional DALI addressable product with 64 individually programmable addresses. Each address can be a DALI luminaire, emergency inverter, PIR sensor, controlled relay or scene set plate.
The DALI64 is DIN rail mounted and enclosed in a steel powder coated enclosure wired to industry standard terminals.
Twin DALI64 units (i.e with 128 addresses) is also available.
A removeable memory module facilitates fast configuration of a replacement gateway should that be needed. In other words, should an gateway need to be replaced for any reason, no reprogramming is necessary, simply remove the memory module and reinsert it into the new controller.