- New
MA-CANPIR Infra-red Addressable PIR Sensor
The Metway MA-CANPIR passive infra red detector is an addressable sensor for use with the MA addressable range of LCM's and gateways. It detects movement using a PIR sensor, which updates the light controller using a CAN bus interface.
Daylight linking can be configured either to keep lights off when there is sufficient ambient light, or used as part of a closed loop to maintain a pre-set luminance level in a dimmable system.
Connection is made by RJ12 connectors on the back of the unit, there are two of these to allow easy onward connection.
Approvals
Request STP/BIM File
- Walk-Test mode with LED indicator.
- Progressive Sensitivity function to eliminate false triggering.
- Integral lux detector, enabling the sensor to control daylight linking.
- Can be configured in presence or absence mode.
- 5 year warranty.
Product Codes
- MA-CANPIR Infra red CAN-BUS sensor.
- RJ12-5m 5 metre RJ12 lead.
- RJ12-10m 10 metre RJ12 lead.
Data sheet
- Voltage
- 9-30V DC
- Case Material
- Flame Retardent ABS
- Operating Temperature
- -10° To +35°C
- Max Humidity
- 90% CH (non-condensing)
- Detection Range
- 5 metres at 2.8 metre ceiling height
- Power Consumption Per Module
- 180mW
- Max Devices
- 10
- Fitting Hole Size
- 41mm
- Colour
- RAL9010
- Pin 1
- Supply Voltage
- Pin 2
- Ground
- Pin 3
- CAN Low
- Pin 4
- CAN High
- Pin 5
- Ground
- Pin 6
- Supply Voltage
Specific References
Array
The Metway MA-CANPIR passive infra red detector is an addressable sensor for use with the MA addressable range of LCM's and gateways. It detects movement using a PIR sensor, which updates the light controller using a CAN bus interface.
Daylight linking can be configured either to keep lights off when there is sufficient ambient light, or used as part of a closed loop to maintain a pre-set luminance level in a dimmable system.
Connection is made by RJ12 connectors on the back of the unit, there are two of these to allow easy onward connection.